Rebar Bending & Stirrup Machines
CNC rebar bending centers, stirrup bending machines, arc benders and forming machines for high-precision rebar fabrication.
Compare all models
Same-category models side by side on the specs that decide your output — bar range, power, speed and power supply.
| Model | GDWHWQ-36 | GDLWZX-32 | GDWQ4-15A | ZD-6M-25 | SKDZWH-36 | GWH50CG | GJZD6-65CZ | GJZD6-50CZ | GW25 | GWH50CZN | ZD-6M-20 | GDPMW-60 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bar range | — | Ø10mm-Ø32mm | Grade III deformed bar / 4-12 | — | 40mm | 50mm | A3 steel / 65mm； | A3 steel / 50mm； | 25mm； | 50mm | — | 16 / 18 / 20 |
| Power | — | 4.4KW*2 | 15KW+5.5KW | 7.5KW | Power: / 4 kW + 2.5 kW (CNC servo) | Model: / YD132M-4/6 | Model: / YEJ132M-4 | Model: / YEJ112M-4 | Power: / 3KW | Model: / YD132M-4 | 8KW | 22kW |
| Output | 48-62 °/S | — | 100m/min | — | Servo control | 30–43 rpm | 4.5 / 7 rpm | 4.5 / 7 rpm | 35 rpm | 0–43 rpm | — | 72°/S |
| Power supply | — | — | — | — | 380V、50HZ | 380V、50HZ | 380V、50HZ | 380V、50HZ | 380V、50HZ | 380V、0-50HZ | — | 380V 50Hz |
| View details → | View details → | View details → | View details → | View details → | View details → | View details → | View details → | View details → | View details → | View details → | View details → |
Specs from official datasheets. Full details on each product page.
CNC Rebar Arc & Bend Machine
CNC rebar arc and bend machine that forms arcs, hooks and bends in one pass for precast and rebar processing plants.
Technical Specifications →
Vertical CNC Rebar Bending Center
Vertical CNC rebar bending center for high-precision bending of bars from 10 to 32 mm with automated positioning.
CNC Rebar Forming Machine
CNC rebar forming machine for high-speed forming of stirrups and shaped bars, single and double line operation.
CNC Five-Head Stirrup Bending Machine
CNC five-head stirrup bending machine producing multiple stirrups per cycle with pneumatic automatic locking.
CNC Rebar Arc Bending Machine
CNC rebar arc bending machine handling bars up to 40 mm with servo control and touch-screen PLC programming.
Rebar Arc Bending Machine
Heavy-duty rebar arc bending machine for bars up to 50 mm, ideal for large-radius arc bending on site.
CNC Rebar Bending Machine
CNC rebar bending machine bending A3 steel up to 65 mm with a 550 mm working table.
CNC Rebar Bending Machine
CNC rebar bending machine for bars up to 50 mm with a 420 mm working table.
CNC Rebar Stirrup Bending Machine
CNC rebar stirrup bending machine for round steel up to 25 mm, quick and precise stirrup production.
Rebar Arc Bending Machine (Upgraded)
Upgraded rebar arc bending machine for bars up to 50 mm with frequency-converted drive.
CNC Five-Head Stirrup Bending Machine
CNC five-head stirrup bending machine with hydraulic automatic locking and 8 kW installed power.
CNC Plane Rebar Bending Center
CNC plane rebar bending center for heavy production up to 50 tons per day, compliant with GB/T 232-2010.
Why buy from the factory
You buy from the source, not from a chain of trading companies.
Every machine ships with its full technical data sheet - published openly on our site.
From a single rebar cutter to a full CNC shearing-and-stirrup production line.
Machines are professionally crated, loaded and shipped to destinations worldwide.
Where these machines are used
High-rise construction
CNC bending and shearing lines for beams, columns and slab reinforcement.
View details →Precast & prefab plants
Five-head stirrup and forming machines for mass production of cage components.
Request a Quote →Bridges & tunnels
Arc benders for tunnel lining, bridge reinforcement and large-radius bends.
View details →Rebar fabricators
Straightening, cutting and thread rolling for custom fabrication shops.
WhatsApp →Buying questions
How do I choose between a rebar bending machine and a stirrup bending machine?
A rebar bending machine bends straight bars into angles (90°/135° etc.). A stirrup bending machine (single-head or five-head CNC) forms closed stirrups/ties from coiled or straight bar. If your work is stirrups and ties, choose a stirrup machine; if you bend straight bars for beams and columns, a CNC bending machine.
What is the capacity of a CNC five-head stirrup machine?
A five-head machine forms multiple stirrups in one cycle - e.g. ZD-6M-25 processes Ø8x10 bars, Ø10x7, Ø12x5 per stroke at 5-8 seconds per cycle, with ±2 mm length accuracy and ±1° angle accuracy.
Explore other categories
Rebar Cutting & Straightening Machines
6 productsHydraulic rebar shearing lines, cutting machines, straightening & cutting machines and band saws for every bar size.
→Auxiliary & Welding Equipment
4 productsRebar thread rolling machines, automatic spring making machines and CO2 MIG welders to complete your rebar processing line.
→Ready to Talk Numbers?
Send us your rebar processing requirements and get a factory-direct quotation within one business day.